View SFH615AGR-X006_4208181.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
FEATURES
* Low CTR degradation * Good CTR linearity depending on forward current * Isolation test voltage, 5300 VRMS
A C
i179060
1 2
4 3
C E
* High collector emitter voltage, VCEO = 70 V * Low saturation voltage * Fast switching times * Temperature stable * Low coupling capacitance * End stackable, 0.100" (2.54 mm) spacing * High common mode interference immunity (unconnected base) * Lead (Pb)-free component * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
DESCRIPTION
The SFH615XXX features a large assortment of current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. Creepage and clearance distances of > 8 mm are achieved with option 6. This version complies with 60950 (DIN VDE 0805) for reinforced insulation up to operation voltage of 400 VRMS or DC.
AGENCY APPROVALS
* UL1577, file no. E52744 system code H or J, double protection * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 * BSI IEC 60950; IEC 60065
ORDER INFORMATION
PART SFH615AA SFH615AB SFH615ABL SFH615ABM SFH615AGB SFH615AGR SFH615AY SFH615AA-X006 SFH615AA-X007 SFH615ABM-X006 SFH615ABM-X007 SFH615AGB-X006 SFH615AGB-X009 SFH615AGR-X006 SFH615AGR-X007 SFH615AY-X006 SFH615AY-X008 SFH615AY-X009 Note For additional information on the available options refer to option information. REMARKS CTR 50 to 600 %, DIP-4 CTR 80 to 260 %, DIP-4 CTR 200 to 600 %, DIP-4 CTR 200 to 400 %, DIP-4 CTR 100 to 600 %, DIP-4 CTR 100 to 300 %, DIP-4 CTR 50 to 150 %, DIP-4 CTR 50 to 600 %, DIP-4 400 mil (option 6) CTR 50 to 600 %, SMD-4 (option 7) CTR 200 to 400 %, DIP-4 400 mil (option 6) CTR 200 to 400 %, SMD-4 (option 7) CTR 100 to 600 %, DIP-4 400 mil (option 6) CTR 100 to 600 %, SMD-4 (option 9) CTR 100 to 300 %, DIP-4 400 mil (option 6) CTR 100 to 300 %, SMD-4 (option 7) CTR 50 to 150 %, DIP-4 400 mil (option 6) CTR 50 to 150 %,SMD-4 (option 8) CTR 50 to 150 %,SMD-4 (option 9)
Document Number: 83672 Rev. 1.6, 10-Jan-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 1
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
ABSOLUTE MAXIMUM RATINGS
PARAMETER INPUT Reverse voltage DC forward current Surge forward current Power dissipation OUTPUT Collector emitter voltage Emitter collector voltage Collector current Total power dissipation COUPLER Isolation test voltage between emitter and detector, refer to climate DIN 40046, part 2, Nov. 74 Creepage distance Clearance distance Isolation thickness between emitter and detector Comparative tracking index per DIN IEC 112/VDE 0303, part 1 Isolation resistance Storage temperature range Ambient temperature range Soldering temperature (2) max. 10 s, dip soldering distance to seating plane 1.5 mm VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C CTI RIO RIO Tstg Tamb Tsld VISO 5300 7 7 175 1012 1011 - 55 to + 150 - 55 to + 100 260 C C C VRMS mm mm tP 10 ms VCE VEC IC IC Pdiss 70 7.0 50 100 150 V V mA mA mW tP 10 ms VR IF IFSM Pdiss 6.0 60 2.5 100 V mA A mW
(1)
TEST CONDITION
SYMBOL
VALUE
UNIT
Notes (1) T amb = 25 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP).
ELECTRICAL CHARACTERISTICS
PARAMETER INPUT Forward voltage Reverse current Capacitance Thermal resistance OUTPUT Collector emitter capacitance Thermal resistance VCE = 5.0 V, f = 1.0 MHz CCE Rthja 5.2 500 pF K/W IF = 60 mA VR = 6.0 V VR = 0 V, f = 1.0 MHz VF IR CO Rthja 1.25 0.01 13 750 1.65 10 V A pF K/W TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
www.vishay.com 2
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83672 Rev. 1.6, 10-Jan-08
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Optocoupler, Phototransistor Output, Vishay Semiconductors High Reliability, 5300 VRMS
ELECTRICAL CHARACTERISTICS
PARAMETER COUPLER Collector emitter saturation voltage Coupling capacitance SFH615AA SFH615AGB SFH615AGR Collector emitter leakage current VCEO = 10 V SFH615ABM SFH615ABL SFH615AY SFH615AB IF = 10 mA, IC = 2.5 mA VCEsat CC ICEO ICEO ICEO ICEO ICEO ICEO ICEO 0.25 0.4 10 10 10 10 10 10 10 100 100 100 100 100 100 100 0.4 V pF nA nA nA nA nA nA nA TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Note Tamb = 25 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO
PARAMETER TEST CONDITION PART SFH615AA SFH615AGB SFH615AGR IC/IF IF = 5.0 mA, VCE = 5.0 V SFH615ABM SFH615ABL SFH615AY SFH615AB SYMBOL CTR CTR CTR CTR CTR CTR CTR MIN. 50 100 100 200 200 50 80 TYP. MAX. 600 600 300 400 600 150 260 UNIT % % % % % % %
SWITCHING CHARACTERISTICS
PARAMETER Turn-on time Turn-off time TEST CONDITION IF = 5.0 mA IF = 5.0 mA SYMBOL ton toff MIN. TYP. 2.0 25 MAX. UNIT s s
TYPICAL CHARACTERISTICS
Tamb = 25 C, unless otherwise specified
% 103
IF
1 k VCC = 5 V
IC IF
5
IF = 10 mA, VCC = 5.0 V 4 3
102
2 1
47
isfh615aa_01
5
101 - 25
isfh615aa_02
0
25 TA
50
C 75
Fig. 1 - Switching Operation (With Saturation) Document Number: 83672 Rev. 1.6, 10-Jan-08
Fig. 2 - Current Transfer Ratio (Typical) vs. Temperature www.vishay.com 3
For technical questions, contact: optocoupler.answers@vishay.com
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
20 pF C 15
f = 1.0 MHz
104 mA IF 5
103 10 5
D=0 0.005 0.01 0.02 0.05 0.1 0.2
D=
tp T
tp T Pulse cycle D = parameter
IF
5 CCE 0 10-2
isfh615aa_03
102 5
0.5 DC
10-1
100 Ve
101
V
102
101
10-5
10-4
10-3
10-2
10-1
isfh615aa_06
100 s 101 tp
Fig. 3 - Transistor Capacitance (Typ.) vs. Collector Emitter Voltage
Fig. 6 - Permissible Pulse Handling Capability Forward Current vs. Pulse Width
IF
120 mA 90
1.2 VF V
25 C 50 C 75 C
1.1 60 1.0 30
0 0
isfh615aa_04
25
50
75
TA
C 100
0.9
10-1
5
100
5
101
isfh615aa_07
5 mA IF
102
Fig. 4 - Permissible Diode Forward Current vs. Ambient Temperature
Fig. 7 - Diode Forward Voltage (Typ.) vs. Forward Current
Ic
30 mA
200 Ptot mW
IF = 14 mA IF = 12 mA
150
Transistor
20
IF = 10 mA IF = 8 mA
100
Diode
10
IF = 1 mA
IF = 6 mA IF = 4 mA IF = 2 mA
50
0 0 25 50 75 15
isfh615aa_08
0
0
5
10
V VCE
TA
C 100
isfh615aa_05
Fig. 5 - Output Characteristics (Typ.) Collector Current vs. Collector Emitter Voltage
Fig. 8 - Permissible Power Dissipation vs. Temperature
www.vishay.com 4
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83672 Rev. 1.6, 10-Jan-08
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Optocoupler, Phototransistor Output, Vishay Semiconductors High Reliability, 5300 VRMS
PACKAGE DIMENSIONS in inches (millimeters)
2 1 Pin one ID
0.255 (6.48) 0.268 (6.81)
ISO method A
3
4
0.179 (4.55) 0.190 (4.83) 0.300 (7.62) typ. 0.030 (0.76) 0.045 (1.14) 0.031 (0.79) typ. 0.050 (1.27) typ. 0.130 (3.30) 0.150 (3.81) 4 typ. 0.018 (0.46)
i178027
0.230 (5.84) 0.250 (6.35) 10 0.110 (2.79) 0.130 (3.30) 3 to 9 0.008 (0.20) 0.012 (0.30)
0.020 (0.508) 0.035 (0.89) 0.050 (1.27) 0.100 (2.54)
0.022 (0.56)
Option 9
0.375 (9.53) 0.395 (10.03) 0.300 (7.62) ref. 0.040 (0.102) 0.098 (0.249) 0.012 (0.30) typ. 0.020 (0.51) 0.040 (1.02)
18486
0.315 (8.00) min.
15 max.
Document Number: 83672 Rev. 1.6, 10-Jan-08
For technical questions, contact: optocoupler.answers@vishay.com
www.vishay.com 5
SFH615AA/AGB/AGR/ABM/ABL/AY/AB
Vishay Semiconductors Optocoupler, Phototransistor Output,
High Reliability, 5300 VRMS
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
www.vishay.com 6
For technical questions, contact: optocoupler.answers@vishay.com
Document Number: 83672 Rev. 1.6, 10-Jan-08
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000 Revision: 08-Apr-05
www.vishay.com 1

▲Up To Search▲

Price & Availability of SFH615AGR-X006

	To Download SFH615AGR-X006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .